Meibot Technologies
MeibotEngineering Better Care
Alappuzha · Kerala · All India

Recovery is measured. So is our work.

Meibot supplies, services and manufactures the equipment that carries a patient from the bed to the door — physiotherapy, rehabilitation, robotic rehabilitation and gynaecology.

See what we build
Since 2021Engineer + doctor founded
10+ yearsHands-on biomedical experience
Made & sourcedWe build and we supply
All IndiaSupply, install & service
01 / 04 We manufacture

Customized treatment beds

Height-adjustable couches and treatment beds built to your room, not to a catalogue. Most clinical spaces don't fit a standard product and never have. Hydraulic or electric, with the section splits and rail configuration your protocol needs.

02 / 04 We manufacture

Parallel bars & therapy stairs

The first place a patient learns to trust their own weight again. Built with adjustable height and width, a stable walking platform, and the rigidity to take a full body-weight grab without flexing.

03 / 04 We manufacture

Standing frames & unweighing systems

Gravity is the hardest part of the first day upright. Standing frames and body-weight-support systems carry part of the load so a patient can practise standing and walking before they can carry themselves.

04 / 04 We manufacture

Patient hoist systems

Transfers are where patients fall and where staff injure their backs. Our hoists get sized to the room. Boom reach, leg splay and spreader bar all specified against your beds and your doorways, not against a generic footprint.

What we supply & service

The machines we source, install and stand behind.

Indian and imported electrotherapy, ultrasound, laser, tecar and decompression systems. Everything here we also install and service, including equipment we didn't sell you. Twenty-two machines in total, each with the manufacturer's full specification.

Open the equipment catalogue
RSD-4D Robotic decompression

RSD-4D

Non-surgical 3D decompression for herniated, bulging and degenerative discs. Every position motorised and repeatable session to session.

See the specification
i-TECAR Tecar therapy

i-TECAR

Energy transferred into tissue by capacitive and resistive electrodes. Works on any tissue type, whatever its density.

See the specification
Photon Laser Class IV laser

Photon Laser

10 to 15 W with an inbuilt pathology library. The Trishul variant mixes three wavelengths at 30 W.

See the specification
Brio Combination Electrotherapy + ultrasound

Brio Combination

Two stimulation channels and a full ultrasound channel in one cabinet, so three patients can be on it at once.

See the specification
i-COMBO Touch-screen platform

i-COMBO

Seven-inch screen, two or four channels, optional 1 and 3 MHz ultrasound, with anatomy and pathology on board.

See the specification
FES-4 Functional stimulation

FES-4

Four channels timed to produce a real movement, with an insole foot switch for foot-drop gait training.

See the specification
Brio Dynamic Ultrasound

Brio Dynamic

1 MHz, 3 MHz and Dynamic from a single applicator, varying frequency and power to treat layer by layer.

See the specification
D-TRAC Progressive traction

D-TRAC

Built around the guarding reflex that constant-speed traction triggers at roughly 18 kg of pull.

See the specification
Everything else

All 22 machines, with full specifications

Plus 45 answered questions on choosing between them — currents, wavelengths, table sections, and what you genuinely don't need.

Open the catalogue
The difference

There is a practising doctor in every design review.

Most equipment companies design at a distance from the patient. Ours can't. Dr. Parvathy Raveendran is a co-founder and a practising Obstetrician & Gynaecologist. She sees, in clinic, where equipment falls short, and that goes straight back into the product.

It began in 2015 as a conversation between two school classmates: Muralikrishna S, then a calibration engineer in the Middle East, and Dr. Parvathy, newly qualified MBBS. They kept circling back to the same problem. Reliable medical equipment was out there. It just wasn't within reach of the hospitals and the patients who needed it most.

Over the next several years he studied biomedical engineering, business management and social work, working with biomedical companies across the Middle East and India and teaching Biomedical Engineering along the way. She specialised in Obstetrics & Gynaecology. In 2021 the two of them, married by then, finally built the company they had been planning for years.

  • Clinical insightProducts shaped by direct medical experience, not engineering theory.
  • QualityManufactured with precision and rigour, for daily use in demanding clinical settings.
  • AffordabilityDesigned deliberately to reduce cost without cutting corners on safety or performance.
  • IntegrityHonesty and transparency with every hospital, clinic and patient we serve.
  • Continuous improvementRefined continually, guided by clinical feedback and engineering research.
MS

Muralikrishna S

Founder

BE · MTech · MBA · MSW

Over 10 years across the Middle East and India working hands-on with biomedical equipment, and many of them teaching Biomedical Engineering.

PR

Dr. Parvathy Raveendran

Co-founder

MBBS · MS · DNB (OBG)

The doctor in the room noticing what patients actually needed. Her ongoing clinical practice directly shapes the gynaecology line.

HS

Harikrishna S

Co-founder

19 years · Sales specialist

A ground-level understanding of what hospitals actually look for when choosing equipment. Leads sales strategy and business growth.

YS

Yedukrishna S

Social Media Manager

5 years · India & Middle East

Leads Meibot's digital presence, telling the Meibot story to the people it's built for.

On the record

Six things we will put in writing.

01

A practising clinician is a co-founder

Not an advisor on retainer. Products are shaped by direct medical experience.

02

Engineering happens in-house

A change request doesn't have to travel through three suppliers before someone can say yes.

03

Affordability is designed in

Cost reduced deliberately in material and in process. Never in safety or in performance.

04

Customization is standard, not premium

Beds, hoists, unweighing systems and clinical furniture built to your room and your protocol.

05

We service what we sell

Indian or imported. After-sales is the founder's own discipline, not an outsourced department.

06

You reach a person

No call-centre layer. You talk to whoever sold, built or serviced the equipment.

Questions

Fifty-five questions, answered straight.

What the currents actually do, which class of laser you need, how many table sections, what we'll invoice, and what you can safely skip buying. All in one place.

Read the FAQ
Talent pool

Join Our Talent Pool

Drop your resume and we'll contact you when a suitable opportunity matches your profile. No open role required — profiles stay on file and go straight to the founders.

Open the talent pool See who we hire
+91 90741 26766 WhatsApp